Albemarle 410 CONVERTIBLE Owner's Manual Page 101

  • Download
  • Add to my manuals
  • Print
  • Page
    / 138
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 100
101
410 Convertible
Perform all routine maintenance.
Check all hose clamps for tightness.
Pump the antifreeze from the fresh and raw water systems
and flush several times with fresh water. Make sure all
antifreeze is flushed from the water heater and it is filled
with fresh water before it is activated.
If your boat is equipped with the optional reverse
osmosis drinking water filter, sanitize the system and
install new filters and commission per the manufacturer’s
instructions.
Check and lubricate the steering system.
Clean and wash the boat.
Install all upholstery, cushions and canvas.
After Launching:
Carefully check the engines and all water systems for
leaks. Operate each system one at a time checking for
leaks and proper operation.
Check the bilge pump manual and automatic switches.
Test the high water alarms.
Check the propeller shaft couplings for proper alignment.
Allow the boat to remain in the water for several hours
before checking the alignment.
Prime the fuel system and start the engines. When each
engine starts, check the exhaust ports for water flow. This
ensures that the cooling pump is operating.
Carefully monitor the gauges and check for leakage and
abnormal noises.
Operate the boat at slow speeds until the engine temperature
stabilizes and all systems are operating normally.
Page view 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 137 138

Comments to this Manuals

No comments