Albemarle 410 CONVERTIBLE Owner's Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 138
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
35
410 Convertible
Salt Water Pump
Supplies electrical current to the washdown switch in the helm
cockpit panel.
Reserved
Reserved for additional DC equipment.
Overhead Lights
Activates the cockpit lights that are built into the hardtop.
Cellular Phone
Activates the accessory plug for a 12-volt cellular phone
charger.
Reserved
Reserved for additional DC equipment.
Spare (4)
Reserved for additional DC equipment
The following is a description of the accessories controlled
by the breakers in the lower DC breaker panel:
DC Amp Meter
Indicates the total amperage or current being drawn through
the DC panel. It is the total current level of all of the 12-volt
equipment in operation at the time.
DC Volt Meter
Indicates the voltage available to the panel.
Battery Test Switch
A four position switch that is used to monitor the available DC
voltage and amperage in each battery bank individually.
Main
Supplies the 12-volt current to the lower DC breaker panel and
protects the panel from an overload.
Navigation Lights
Supplies 12-volt electrical current to the nav/anchor and instru
-
ment lights switches in the helm switch panel.
Cabin Lights Fwd
Supplies 12-volt electrical current to the cabin light switches
in the main stateroom and part of main salon.
Cabin Lights Fwd
Supplies 12-volt electrical current to the cabin light switches
in the main stateroom and the head compartment.
Cabin Lights Aft
Supplies 12-volt electrical current to the cabin light switches
in the main salon.
Cabin Lights Aft
Supplies 12-volt electrical current to the cabin light switches
in the main salon and the galley.
Cockpit Lights
Supplies 12-volt electrical current to the cockpit lights switch
in the helm switch panel.
Engine Room Lights
Supplies 12-volt electrical current to the engine room lights.
Bilge Pump Aft
Supplies 12-volt electrical current to the aft bilge pump switch
in helm switch panel enabling the operator to manually activate
the aft bilge pump. The automatic switch is always supplied
current when the batteries are connected.
Bilge Pump Fwd
Supplies 12-volt electrical current to the forward bilge pump
switch in helm switch panel enabling the operator to manu-
ally activate the forward bilge pump. The automatic switch is
always supplied current when the batteries are connected.
Bilge Pump Mid
Supplies 12-volt electrical current to the mid bilge pump switch
in helm switch panel enabling the operator to manually activate
the mid bilge pump. The automatic switch is always supplied
current when the batteries are connected.
Washdown Pump
Supplies 12-volt electrical current to the raw water washdown
pump switch located in the helm cockpit panel.
Note: Please refer to the Raw Water System chapter for
more information on the livewell and washdown
systems.
Fishbox Macerator
Supplies 12-volt electrical current to the fishbox drain pump
switch located in the helm switch panel.
Fresh Water Pump
Supplies 12-volt electrical current directly to the fresh water
pump pressure switch located on the pump. The pressure
switch automatically controls the water pump when the system
is activated and properly primed. It is protected by the circuit
breaker in the panel and an automatically resetting breaker on
the pump motor or an in-line fuse near the pump motor.
Sump Pump
Supplies 12-volt electrical current directly to the sump
pump.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 137 138

Comments to this Manuals

No comments